|
Our Community is 662,000 Strong. Join Us. |
hard shifts with new s. packmishalah 09-09-2011, 12:17 AM got the new selenoid pack in and juiced up but it shifts a bit hard, especially from 2-3. Also, had to put 3 pints of +4 in and it still doesn't register at the right mark on the stick. i lost almost no fluid during the s.pack exchange, and didn't see any dripping for several months. I wonder if the old s.pack leaking actually pumped out enough fluid to stop dripping on the driveway. I do check it periodically, but this van is driven very little. So, do I put more fluid in or drive it some more and keep checking it? trannyman52 09-09-2011, 01:29 AM fill it to full,,,,,disconnect battery to re-set computer ,,,,driving after re-set should re-learn shift settings,,,, may take a bit of driving........did I mention fill to full???????? mishalah 09-09-2011, 01:07 PM fill it to full,,,,,disconnect battery to re-set computer ,,,,driving after re-set should re-learn shift settings,,,, may take a bit of driving........did I mention fill to full???????? Will do. Thanks. Automotive Network, Inc., Copyright ©2012
|