96 PAU intake manifold gasket replacement

96 PAU with an intake manifold gasket leak. How do I replace all gaskets associated with the manifold? If you can supply pictures of the lower gasket, I'd appreciate it. I saw a thread about the gasket replacement but couldn't find how to replace it or exactly where the lower gasket is.

Check the following:

http://www.automotiveforums.com/vbulletin/forumdisplay.php?f=2144

BNaylor seems to have a lot of experience and knowledge, you can't go wrong with his advice.

A couple of other forums have dedicated tech sections with detailed instructions. They're not hard to come by using google.

When replacing the gaskets on an '96 Ultra (Series II Vin-I) you should replace the following:

FEL-PRO Part # MS95977
1st Design; w/Rubber end seals w/o Locating pins; Lower set
http://info.rockauto.com/getimage/getimage.php?imagekey=260739&imageurl=http%3A//info.rockauto.com/Fel-Pro/MS95977_TOP.jpg

FEL-PRO Part # MS95744
Plenum Gasket Set; Upper set
http://info.rockauto.com/getimage/getimage.php?imagekey=260723&imageurl=http%3A//info.rockauto.com/Fel-Pro/MS95744_TOP.jpg

FEL-PRO Part # 61024
Throttle Body Gasket
http://info.rockauto.com/getimage/getimage.php?imagekey=446700&imageurl=http%3A//info.rockauto.com/Fel-Pro/61024_TOP.jpg

ACDELCO Part # 217454 or STANDARD MOTOR PRODUCTS Part # SK9
SEAL KIT,F/INJR(O RING
http://info.rockauto.com/getimage/getimage.php?imagekey=88864&imageurl=http%3A//images.wrenchead.com/smartpages/partinfo_resize/DUS/217-454.jpg