2004 2.4l fan clutch removal
retrohwam
11-08-2010, 05:28 PM
Working on my son's 2004 Frontier with a 2.4l. Replacing the water pump and having trouble with removing the fan clutch attached to the front of the pump.
First question: are the nuts right hand or left hand thread? I can't seem to break them either way and I've started to round the corners of two nuts.
Second question - are the nuts 10mm? I'm using a 10mm tubing wrench and it seems to be correct but it's not quite tight.
Any help would be appreciated -
Thanks,
Duane
First question: are the nuts right hand or left hand thread? I can't seem to break them either way and I've started to round the corners of two nuts.
Second question - are the nuts 10mm? I'm using a 10mm tubing wrench and it seems to be correct but it's not quite tight.
Any help would be appreciated -
Thanks,
Duane
Cusser
12-18-2012, 01:21 PM
Well, I hope you got this completed by now. I've done this job on a 1998 with that engine, and it was straightforward. I used a 10mm box wrench, and the threads are typical right-hand threads. It is a little cramped.
Automotive Network, Inc., Copyright ©2024