97 Rodeo Blower Not working

10-12-2010, 03:41 PM
Hello, My blower stop working and was not working on any speed from 1-4 it was all dead. I read here how to fix it and now it work like new. I remove the blower and tested with the car battery, the motor worked. So I knew the motor is fine. I tested the blue and white wires and I was getting no current. I check the fuses and there was not current. I did not know that I have to have the car running in order to have current. After removing half of the dash board to test the speed control unit I read here that if the car is off there will be no current. To make a long story short I had to replace the Fan blower resistor. From what I'm reading is either going to be the blower or the resistor that goes out. If the blower is working, do a bridge from the resistor on the middle prong=hot to the one that says H=speed and the blower should work. Then you know your resistor is bad. The resistor is behind the glove box right in front of you. Here in the picture I have removed the old one and placed in the new one.

06-05-2011, 06:15 PM
I am having the same problem. Your links aren't valid anymore. Do you still have the pictures you could send me? Thank you.

Add your comment to this topic!