Problem removing IDI Cover
Ray Vassallo
09-06-2010, 06:49 AM
I am trying to remove the IDI cover to change my spark plugs on my 2005 Sunfire with a 2.2 Liter Ecotec motor. There is a metal bracket that lifts the throttle cables above the IDI cover that needs to be removed. The bracket appears to be held in place by a nut. After removing the nut the bracket stays firmly in place. I tried to pry the bracket away from the IDI cover but it does not budge. I did not want to use excessive force to prevent damage.
How does this bracket come off? I cannot see how bracket can stay on to remove the IDI cover since the cover has to go straight up.
I have taken some pictures of the bracket to identify what I am taking about and how it is mounted. You will find the pictures at:
http://starturl.com/zynpx
Thanks,
Ray
How does this bracket come off? I cannot see how bracket can stay on to remove the IDI cover since the cover has to go straight up.
I have taken some pictures of the bracket to identify what I am taking about and how it is mounted. You will find the pictures at:
http://starturl.com/zynpx
Thanks,
Ray
Automotive Network, Inc., Copyright ©2024