94 S10 CPI problems, Assistance needed


tedzbug
06-28-2010, 09:10 PM
I just bought a 94 S10 to use as a work truck.... Hard starting, Smells like gas really bad, runs rough, no power..... So after reading a little here, i pulled my intake manifold and here we have a leaking Fuel return line? Can i just replace the line and all is well?

http://lh5.ggpht.com/_1eqgUICXIyY/TClUbNDn_rI/AAAAAAAAHQs/Jytp41FQUcY/s640/P6288162.JPG

tedzbug
06-29-2010, 05:49 AM
Hopefully someone knows the answer. Would love to just replace the line kit for $40-60 and the gasket....

tedzbug
06-29-2010, 04:32 PM
hmmpf... nearly 40 views and no-one knows?

MT-2500
06-30-2010, 10:15 AM
hmmpf... nearly 40 views and no-one knows?
You have.:iceslolan:rofl:
Well no one can answer that question for sure.
But you.
Make it interesting to get a lot of answers.
And give it time.
It has not even been posted a day.

Good answers take time just like good wine.

If the line is leaking get a nut kit and replace both line while you are there.
The before installing cover prime up fuel pressure and recheck for leaks and make sure fuel pressure comes up to full pressure.
If no leaks and full fuel pressure install cover and run and recheck fuel pressure.
Also remember that unit is hard on fuel pressure regulators.
Good Luck and let us know how it goes.

tedzbug
07-01-2010, 08:32 AM
I think i am going to start with the return lines and a regulator.... found them pretty cheap locally

We'll see how it goes from there.

MT-2500
07-01-2010, 02:16 PM
I think i am going to start with the return lines and a regulator.... found them pretty cheap locally

We'll see how it goes from there.

Do you mean the pressure and return lines?
Nut kit has both with it.

tedzbug
07-01-2010, 02:29 PM
yup, that is what i meant.

Add your comment to this topic!