Lamborghini wheel measurements REAR
berkelusa
04-29-2003, 08:32 PM
OK.. A BIG question that may take you a few minutes to help ME with wheel alignment on my fiberglas Countach project.. (see website)
IF you held a yardstick on the rear tail-lights reaching down to the ground and measured from the FACE of the lights to the rear axles CENTER what is the measurement?
I know that the car factory has a 95-1/2" wheelbase so the front would be obvious..
But please be as EXACT as possible..
TIA
Rob
http://www.nhlotteryonline.com/graphics/ass.jpg
IF you held a yardstick on the rear tail-lights reaching down to the ground and measured from the FACE of the lights to the rear axles CENTER what is the measurement?
I know that the car factory has a 95-1/2" wheelbase so the front would be obvious..
But please be as EXACT as possible..
TIA
Rob
http://www.nhlotteryonline.com/graphics/ass.jpg
berkelusa
04-29-2003, 08:40 PM
Lambo Build 101 (http://www.nhlotteryonline.com/RobsLambo/index.html)
http://www.nhlotteryonline.com/RobsLambo/DSC00021.JPG
Formers #1 to 5 in place...
:eek:
http://www.nhlotteryonline.com/RobsLambo/DSC00021.JPG
Formers #1 to 5 in place...
:eek:
Automotive Network, Inc., Copyright ©2024