Dorman door hinge


HeavyJ
03-28-2010, 08:56 AM
Has anyone installed one of these :https://www.dormanproducts.com/cgi-bin/vm91corp30r/item-dtl.w?sid=jaiMlakbYyWdaOkr014246396090386003&item=924-106&icrid=0x001bbecd&clt=hwrap1&vsrch_str=&vsrch_brand=&vsrch_cat=&st_amount=&end_amount=&start=&vfrom=&prev=&vnext=&category_list=:0

Its the bolt on hinge for s10. Any thoughts welcome.

MT-2500
03-28-2010, 09:05 AM
Is your hinge all bad or just need pin and bushing?

HeavyJ
03-28-2010, 10:29 AM
VERY bad! Ive not had the truck long, and the spring was missing, pin holes are almost torn out, plus I think the door has been sprung back at some time. I can get the factory replacements, but pretty expensive. The ones I mentioned are bolt on. Pretty sure the door side would not be a problem, just wondering about the cab side.

MT-2500
03-28-2010, 11:18 AM
VERY bad! Ive not had the truck long, and the spring was missing, pin holes are almost torn out, plus I think the door has been sprung back at some time. I can get the factory replacements, but pretty expensive. The ones I mentioned are bolt on. Pretty sure the door side would not be a problem, just wondering about the cab side.
That hinge kit shoud do the job than.
Sometimes cab side bolts are a pain.
Take door off may help to get to cab hing bolts.
Good luck and let us know how it goes.

Add your comment to this topic!